How should the Fiber Laser Cutting Machine be maintained? Next, the Laser Marking Machine manufacturer will explain to you slowly:
(1) When the light pen of the laser cutting machine is running, it must not touch the load-bearing beam;
(2) The laser generator is the key part of a laser cutting machine and it must be moved carefully to prevent it from being broken due to poor movement;
(3) In actual operation, once a common fault is found, it should be terminated immediately to prevent casualties;
(4) The Laser Cutter cannot be started when the water circulation system is not good;
(5) When preparing to turn off the laser cutting machine in advance, the current must be set at about 5 amps;
(6) During work, the working width should be higher than the actual operating width;
(7) Keep the surface of the equipment clean and tidy;
(8) Keep the cooling and circulating water inside the laser cutting equipment clean, clean the chiller on time and obtain clean double-distilled water.