What are the startup steps of the portable Laser Marking Machine application? The belt laser marking machine is more compact than the traditional laser marking machine, does not occupy the total area, and is convenient to place and move. It is the result of the updated all-in-one Desktop Laser Marking Machine. The principle is to use The laser beam is permanently marked on the surface of a variety of different chemical substances. The convenient and fast laser marking machine has the characteristics of small size (no water cooling equipment, application of air cooling), only good quality (base model), maintenance-free and other characteristics.
1.Connect to the three-phase five-wire power supply and turn on the key power switch. Developed and designed a high-power all-dry-solid laser optical device and a special type of laser, the application steps of the laser marking machine and its semiconductor material laser marking machine. At this time, the equipment is exhausted. And the refrigeration unit is plugged in, and the ammeter indicates that the marked value is up to 7A;
2. Wait for about 5 seconds, press the open button on the external operation panel, the galvanometer indicates that the marked value is zero, after 5 seconds, the krypton lamp is ignited, and the galvanometer indicates that the marked value is 7A. (Refer to the actual operation and use instructions of the laser power supply);
3. Turn on the power of the scanning galvanometer;
4. Turn on the computer and adjust the required marking document;
5. Adjust the laser power to the working current (18A), and then you can gradually mark; after the marking is completed, turn off the power of each component in reverse in the above order:
① Adjust the current of the laser power supply to the minimum (up and down 7A);
② Turn off the computer;
③Turn off the power of the scanning galvanometer;
④Press the stop button;
⑤ Turn off the key power switch;
⑥ Disconnect the incoming line power.
